0

Free UK Mainland delivery

Process Control Equipment

Items 1 to 9 of 11 total

per page
Page:
  1. 1
  2. 2

Grid  List 

REFINE
SCAIME ENOD-1 Transmitter by Positive Weighing - 01684 561002

ENOD 1 Transmitter

eNod1-T

  • 1 000 000 counts,
  • 1 600 meas./s.
  • Miniature electronic board for measurement transmission
  • High performance 24 bits A/D converter
  • Able to run up to 4 strain gauge load cells (4/6-wire)
  • Programmable digital filters 2 digital inputs and 2 outputs
  • 1 RS485/RS232 output and 1 CANbus output MODBUS-RTU and CANOpen protocols
£160.00 +VAT
Enod 4 C by SCAIME - From Positive Weeighing 01684 561002

eNod 4 - C

eNod4-T

±500 000 d, 1 600 meas/s

  • Presentation on rail DIN housing
  • Able to run up to 4 strain gauge load cells
  • Programmable digital filters
  • 2 digital inputs and 4 outputs
  • 1 USB port for setting by PC
  • 1 PLC output RS485 or CANbus
  • MODBUS-RTU and CANOpen protocols
  • PROFIBUS-DP version 1 RS485 for eNodTouch touch panel
  • Optional analog input 0-10 V or 4-20 mA
£400.00 +VAT
SCAIME eNod View Data Aquisition Software from PWS Ltd - 01684 561002

ENOD VIEW Data Aquisition Software

eNodView

AXD, AAD assistant

  • eNod / AXD / AAD remote control from a PC
  • System calibration
  • Save/Change of all parameters
  • Measurement acquisition with graphical display
  • Digital filters simulation
  • FFT frequency analysis
£175.00 +VAT
SCAIME Enod 3 by Positive Weighing Solutions - 01684 561002

ENOD3 - Din Rail Version

eNod3

  • Presentation on DIN Rail housing
  • 1 000 000 counts, 1 600 meas./s.
  • Digital high speed process controler 
  • approved 6000d OIML R76 Functions transmitter,
  • Able to run up to 4 strain gauge load cells (4/6-wire)
  • eNod3 JB4 version integrated into 4 load cells junction box
  • Programmable digital filters 2 digital inputs and 2 outputs
  • 1 RS485/RS232 output and 1 CANbus output MODBUS-RTU and CANOpen protocols

 

    Version T - Transmitter
    Version C - Checkweighing
    Version D - Dosing

Starting at: £290.00 +VAT

SCAIE Enod- 3 D Digital Conditioner - from PWS Ltd - 01684 561002

ENOD 3 With integrated Dosing software (Card Only)

eNod3-C

  • Presentation on DIN Rail housing
    • 1 000 000 counts, 1 600 meas./s.
    • Digital high speed process controler 
    • approved 6000d OIML R76 Functions transmitter,
    • checkweigher and peak value detection
    • Able to run up to 4 strain gauge load cells (4/6-wire)
    • eNod3-C JB4 version integrated into 4 load cells junction box
    • Programmable digital filters 2 digital inputs and 2 outputs
    • 1 RS485/RS232 output and 1 CANbus output MODBUS-RTU and CANOpen protocols
    £380.00 +VAT
    SCAIME Enod £ with Dosing Software by PWS Ltd- 01684 561002

    ENOD 3 With Integrated Checkweighing Software (Card Only)

    eNod3-C

  • Presentation on DIN Rail housing
    • 1 000 000 counts, 1 600 meas./s.
    • Digital high speed process controler 
    • approved 6000d OIML R76 Functions transmitter,
    • checkweigher and peak value detection
    • Able to run up to 4 strain gauge load cells (4/6-wire)
    • eNod3-C JB4 version integrated into 4 load cells junction box
    • Programmable digital filters 2 digital inputs and 2 outputs
    • 1 RS485/RS232 output and 1 CANbus output MODBUS-RTU and CANOpen protocols
    £350.00 +VAT
    SCAIME CPJ Din Rail Mounted Loadell Conditioner by Positive Weighing 01684 561002

    CPJ-2S Analogue Transmitter (2 set points Din Rail Version)

    CPJ DIN

    • ± 10 V / 0-10 V - 4-20 mA
    • Analog signal conditioner
    • Presentation in rail DIN housing,
    • IP65 housing or single board
    • Able to run up to 4 strain gauge load cells (4 or 6-wire)
    • Voltage output (± 10 Vdc ou 0-10 Vdc) and current output (4-20 mA)
    • Shunt calibration signal 2 set points on relays optional version (CPJ 2S)
    £300.00 +VAT
    SCAIME CPJ IP65 Boxed Loadell Conditioner by Positive Weighing 01684 561002

    CPJ Analogue Transmitter (IP65 Boxed Version)

    CPJ DIN

    • ± 10 V / 0-10 V - 4-20 mA
    • Analog signal conditioner
    • Presentation in IP65 housing,
    • IP65 housing or single board
    • Able to run up to 4 strain gauge load cells (4 or 6-wire)
    • Voltage output (± 10 Vdc ou 0-10 Vdc) and current output (4-20 mA)
    • Shunt calibration signal 2 set points on relays optional version (CPJ 2S)
    £265.00 +VAT
    SCAIME CPJ Din Rail Mounted Loadell Conditioner by Positive Weighing 01684 561002

    CPJ Analogue Transmitter (Din Rail Version)

    CPJ DIN

    • ± 10 V / 0-10 V - 4-20 mA
    • Analog signal conditioner
    • Presentation in rail DIN housing,
    • IP65 housing or single board
    • Able to run up to 4 strain gauge load cells (4 or 6-wire)
    • Voltage output (± 10 Vdc ou 0-10 Vdc) and current output (4-20 mA)
    • Shunt calibration signal 2 set points on relays optional version (CPJ 2S)
    £215.00 +VAT

    Items 1 to 9 of 11 total

    per page
    Page:
    1. 1
    2. 2

    Grid  List 

    REFINE

    Newsletter

    Sign up today to get up to date news on our latest products, available discounts and much more.

    We do not sell information to 3rd parties

    Talk to us

    If you have any queries about any products that you see on our website (or even ones that you don’t and would like to see) please get in touch.

    01684 561002

    Request A Call Back